Porcelain Crowns/Caps

PORCELAIN CROWNS/CAPS

dental-crown-before-after

A dental crown may be needed in the following situations:

  • To protect a weak tooth (for instance, from decay) from breaking or to hold together parts of a cracked tooth
  • To restore an already broken tooth or a tooth that has been severely worn down
  • To cover and support a tooth with a large filling when there isn’t a lot of tooth left
  • To hold a dental bridge in place
  • To cover mis-shapened or severely discolored teeth
  • To cover a dental implant
  • To make a cosmetic modification

Before and After Crowns 7208ff_c6b363703d794acba6e44457b519fe09

 

What Types of Crowns Are Available?

Permanent crowns can be made from stainless steel, all metal (such as gold or another alloy), porcelain-fused-to-metal, all resin, or all ceramic.

pfmin
Porcelain fused to metal – metal is on the inside
DSC_3463-1.190143302_std
Gold crown
types-of-dental-crowns-9-728
All resin crown
All ceramic crowns
All ceramic crowns

Stainless steel crowns are prefabricated crowns that are used on permanent teeth primarily as a temporary measure. The crown protects the tooth or filling while a permanent crown is made from another material. For children, a stainless steel crown is commonly used to fit over a primary tooth that’s been prepared to fit it. The crown covers the entire tooth and protects it from further decay. When the primary tooth comes out to make room for the permanent tooth, the crown comes out naturally with it. In general, stainless steel crowns are used for children’s teeth because they don’t require multiple dental visits to put in place and so are more cost- effective than custom-made crowns and prophylactic dental care needed to protect a tooth without a crown.

stainless_steel_crown_500
Stainless steel crown

Metals used in crowns include gold alloy, other alloys (for example, palladium), or a base-metal alloy (for example, nickel or chromium). Compared with other crown types, less tooth structure needs to be removed with metal crowns, and tooth wear to opposing teeth is kept to a minimum. Metal crowns withstand biting and chewing forces well and probably last the longest in terms of wear down. Also, metal crowns rarely chip or break. The metallic color is the main drawback. Metal crowns are a good choice for out-of-sight molars.

Porcelain-fused-to-metal dental crowns can be color matched to your adjacent teeth (unlike the metallic crowns). However, more wearing to the opposing teeth occurs with this crown type compared with metal or resin crowns. The crown’s porcelain portion can also chip or break off. Next to all-ceramic crowns, porcelain-fused-to-metal crowns look most like normal teeth. However, sometimes the metal underlying the crown’s porcelain can show through as a dark line, especially at the gum line and even more so if your gums recede. These crowns can be a good choice for front or back teeth.

All-resin dental crowns are less expensive than other crown types. However, they wear down over time and are more prone to fractures than porcelain-fused-to-metal crowns.

All-ceramic or all-porcelain dental crowns provide better natural color match than any other crown type and may be more suitable for people with metal allergies. However, they are not as strong as porcelain-fused-to-metal crowns and they wear down opposing teeth a little more than metal or resin crowns. All-ceramic crowns are a good choice for front teeth.

Temporary versus permanent. Temporary crowns can be made in your dentist’s office, whereas permanent crowns are made in a dental laboratory. Temporary crowns are made of acrylic or stainless steel and can be used as a temporary restoration until a permanent crown is constructed by a lab.

Zirconia or milled crown which are digitally constructed either in an office that has the software and hardware to produce them or in a dental lab. Dental offices that have the software and hardware have the ability to produce a crown in one visit with no need for a temporary. These crowns require no impression.